Video output settings, Initial settings menu 07 – Pioneer DV-595K-S User Manual

Page 39

Advertising
background image

Initial Settings menu

07

39

En

Video Output settings

DTS Out

DTS

DTS encoded digital audio is output when playing a DTS disc.
(Noise will be output if your amplifier/receiver is not compatible
with DTS audio.)

Off

No digital audio is output when playing a DTS disc.

96 kHz PCM Out

96kHz > 48kHz

96 kHz digital audio is converted to 48 kHz for digital output.

96kHz

96 kHz digital audio is output as is at 96 kHz.

MPEG Out

MPEG > PCM

MPEG encoded digital audio is converted to PCM audio for
digital output.

MPEG

MPEG encoded digital audio is output as is.

HDMI Out*

* DV-490V only.

LPCM (2CH)

Set if your monitor or device only accepts stereo input. On this
setting multichannel audio is downmixed to 2 channels for
stereo linear PCM output. (In case of DTS source, the HDMI
audio output is turned off.)

Auto

Dolby Digital, DTS and MPEG sources are processed
according to how they were encoded, but if your amplifire/
monitor is not compatible with DTS audio, DTS audio output
from HDMI is turned off. Linear PCM sources are heard as is.

Off

No digital audio output.

Setting

Option

What it means

TV Screen

(This setting effective for
analog and HDMI video
output. See also

Screen

sizes and disc formats

on page 45.)

4:3 (Letter Box)

Set if you have a conventional 4:3 TV. Widescreen movies are
shown with black bars top and bottom.

4:3 (Pan & Scan)

Set if you have a conventional 4:3 TV. Widescreen movies are
shown with the sides cropped so that the image fills the screen.

16:9 (Wide)

Set if you have a widescreen TV.

Component Out

Interlace

Set if your TV is not compatible with progressive scan video.

Progressive

Set if your TV is compatible with progressive scan video (see
your TV’s instruction manual for details). See also

Switching

the video output to interlace using the front panel controls

on

page 12.

Note that progressive scan video is only output from the
component video jacks and that there is no output from the
composite and S-video jacks when this setting is selected.

Setting

Option

What it means

DV393S_ASIA_EN.book 39 ページ 2006年5月12日 金曜日 午後7時50分

Advertising