Pacific Digital MF-810 - Manual (Page 14)

Copyright© 2002-2003 Pacific Digital Corporation
Page 11
not respond while in the Menu system. Note:
this feature is only on the MF-810S stereo
model.
Mute MemoryFrame speaker output (music or voice)
can be easily muted with one touch of this
button. Press again to un-mute. Note: this
feature is only on the MF-810S stereo model.
Special This is a one-touch short-cut button that you can
customize to quickly access a function that you
use often and to which you want to have fast
one-touch access. Note: this feature is only on
the MF-810S stereo model.
Wall Mount Slots There are four wall mount slot locations: two for
portrait and two for landscape orientation. The
slots will accept a standard #6 wood screw.
Stereo Speakers
Built-in stereo speakers play your WAV voice or
music files with each picture in your slideshow.
Great for narrative shows and storybook
applications! Note: this feature is only on the
MF-810S stereo model.
Power Connector
The Power Connector is the connection point for
the supplied power adapter, and is used to
provide main power to the MemoryFrame. The
input is 12 VAC developed through the supplied
AC power adapter.
VGA Connector
The VGA connector is the connection point for
an external wall-projector, CRT or LCD
monitor, and can be used for simultaneous
display of the images to another screen. This
allows the MemoryFrame to be used as a low-
cost No PC required presentation device! Note:
this feature is only on the MF-810S stereo
model.
USB Connectors
There are 3 USB connectors as shown in Figure
4. The two marked “Camera” are used to
transfer images from a camera, USB memory-
card-reader, or a USB thumb-drive. The one
marked “PC” is used to transfer shows to/from a