Panasonic WJ-FS309 - Manual (Page 9)

9
SETUP MENU
In the SETUP MENU you can set preferences for ALARM,
MONITOR, REC OUT, SEQUENCE and SYSTEM to meet
your requirements.
● Displaying the SETUP MENU
1. Confirm that the camera and peripherals are connected
correctly and securely.
2. Turn on the power switches of all system components.
3. Press the
MENU/ESC button for 2 seconds or more.
The SETUP MENU appears on the monitor as shown
below.
WJ-FS316 SETUP
ALARM SETUP
MONITOR OUTPUT SETUP
REC OUTPUT SETUP
SEQUENCE SETUP
SYSTEM SETUP
MENU
ESC
• The following buttons are used in the SETUP MENU:
C : Moves the cursor downward.
D : Moves the cursor upward.
A : Moves the cursor to the left.
B : Moves the cursor to the right.
– : Selects the mode or parameter.
+ : Selects the mode or parameter.
SET: Executes the selections and displays a submenu
for an item with the ( ) mark.
• Press the MENU/ESC button to execute the currently
highlighted setting and return to the previous menu in
the SETUP MENU.
• To finalize the setting and return to normal viewing,
press the MENU/ESC button for 2 seconds while the
SETUP MENU is displayed.
Note: If alarm is activated during the setup operation,
the SETUP MENU disappears and the display
returns to the normal picture. Any settings previous-
ly made take effect, even if the
MENU/ESC button
was not pressed yet.
SET
9 10 11 12 13 14 15
The items of the WJ-FS309/FS409 SETUP MENU are the
same as in the WJ-FS316/FS416 SETUP MENU.
<WJ-FS316/FS416>
1
SET
2 3 4 5 6 7
<WJ-FS309/FS409>