Pioneer CD-ROM DRIVE UNIT DR-U16S - Manual (Page 18)

18
<DRC1087>
En
DISC OPERATION
DISC SETTING METHOD
¶ Disc setting
Insert the disc into the disc loading slot with the label facing up.
When using 8 cm discs, attach a CD adapter (available at stores) to the disc, and insert the disc into
the disc loading slot.
Fig.6
When using a CD adapter, attach it properly to the disc, and check that it does not
come off to prevent damage to the disc and adapter.
Do not insert 8 cm discs by themselves.
8 cm disc
CD adapter
Do not attempt to insert more than two discs at one time, nor insert discs during play.
Do not insert the disc with excessive force so that it bends nor attempt to insert it by force.
While the unit is pulling in or ejecting discs, do not attempt to do the opposite using force
as this may cause damage to the disc or malfunction of the unit.