Planet Technology VIP-320 - Manual (Page 41)

Chapter 6 DECT Handset Operations
In machine default state, the DECT handset DCT-100 is registered with VIP-320. When adding
more DECT handsets to the VIP-320, these handsets should be registered with VIP-320 to be
operational.
Using Headset (optional)
The headset jack is located in the middle right side
of the handset and is 2.5mm standard plug.
Simply plug the headset into the jack and the
headset will be activated.
Note:
When the headset is plugged into the headset jack,
the microphone on the handset will be deactivated.
Charger
Connect the modular end of the power adapter
to the power jack of the charger, and plug the
other end into a standard AC wall outlet.
Charging Handset
Before initial operation, YOU SHOULD FULLY
CHARGE THE HANDSET for 24 hours.
To charge the handset, just place it on the
charger. When charging, the handset is
automatically turned on and the battery icon on
the display will blink.
41