Planet Technology VIP-320 - Manual (Page 42)

2.2 DECT Screen Display
This area displays in-use information such as the caller's number, menus,
call duration, etc.
In standby mode, the display will show the signal strength icon, battery
status icon, handset and base number.
Signal strength icon:
This icon is always displayed when your phone is on,
and shows the current signal strength. More bars
indicate more signal strength.
Mute icon:
This icon indicates that the phone is in mute
conversation mode.
Lock icon:
This icon indicates that the key lock function is
activated.
Line icon:
The icon is displayed when the line is engaged. L1
means PSTN line is engaged. L2 means Skype VoIP
line is engaged. L3 means Intercom is engaged.
In use icon:
This icon indicates that the phone is in use mode.
•
Intercom icon
This icon indicates that the phone is in the intercom
conversation mode.
Speakerphone icon:
This icon indicates that the phone is in speakerphone
mode.
Operation icon
This icon indicates that the phone is in the operation
mode.
Caller ID icon
This icon indicates that there is a new call. To view the
call, access the Caller ID menu.
Hot call
This icon indicates that the hot call function is
activated.
Battery status icon
This icon is displayed at all times when your phone is on, and shows the level of your battery charge. The
more bars, the greater the charge. During charging, the icon will flash.
Register your DCT-100 to VIP-320
• Press Intercom button on VIP-320 for 5 seconds until the Paring LED lights.
• Press key to go into manual option.
• Select HS register
• Press INT key.
• Select the desired DECT base (Base1 for example). Press INT key, DCT-100 will display Searching:
on the LCD screen
• Wait till a machine hardware ID shows up, ex: 002F5-11708H, then press INT
• When machine prompts for PIN number, inert PIN number 1590 then press INT, then DCT-100 will
start to register to base and showing Searching….
• Once the registration is completed, the DCT-100 will show HS x, Base y on the screen.
42