Panasonic PV-DF2703 - Manual (Page 34)

34 For assistance, please call : 1-800-211-PANA(7262) or send e-mail to : [email protected]
Search System is ...
Each time a recording is made, an invisible index mark is placed on the tape. When timer recordings are
made, program index and information are also included. These index marks can be used to access or
scan recordings.
1
Press SEARCH*
in Playback or
Stop mode to
display INDEX
SEARCH screen,
and then press
NUMBER keys to
select the
recording number.
• To calculate
number, see below.
Index Search
Go directly to the desired recording.
• If Index Search is started very close to an index
mark, that index mark may not be counted in
the search.
2 Playback begins
at search end. To
search forward
or back 1 index,
press FF or REW
while screen left
is displayed (10
seconds).
NOTE: indicates start points of each recording.
6 1 5 7 2 3 4
■ To calculate the Index Number
Example 1:
To go to rec. 2 from rec. 4, enter 3 and press
REW.
1 7 5 3 4 6 2
Example 2:
To go to rec. 6 from rec. 2, enter 4 and press FF.
ENTER I NDEX NUMBER : 1
US I NG 1- 9 KEYS
FORWARD SEARCH : FF
REVERSE SEARCH : REW
EX I T : SEARCH
I NDEX SEARCH
FORWARD SEARCH : FF
REVERSE SEARCH : REW
I NDEX SEARCH
To cancel, press PLAY.
Tape Operation
Press FF or REW to start search. FF
REW
S U R
R O U N D
SELECT
SET
NUMBER
keys
REW
FF
SEARCH
Note