Panasonic PV-DF2703 - Manual (Page 14)

14 For assistance, please call : 1-800-211-PANA(7262) or send e-mail to : [email protected]
Initial Setup
(Ready to Play)
2 / 6 / 2003 THU 12 : 00PM
DST : ON
AUTO CLOCK SET
COMPLETED
SETT I NG : CH 1 0
PLEASE SET CLOCK BY
PRESS I NG ACT I ON KEY
AUTO CLOCK SET
I S I NCOMPLETE
Plug the unit power cord into an AC wall outlet. 1
3
2
• If you use a cable box, turn it on and set it to the Public
Broadcasting Service (PBS) channel in your time zone.
If you use a DSS receiver, it must be turned off.
Initial Setup (Ready to Play)
Please make all cable or antenna connections before powering on.
Press POWER* on the remote or unit. The unit
comes on and auto channel and clock set
starts.
Settings are made automatically. When setup
is done, this screen appears.
If AUTO CLOCK SET IS INCOMPLETE screen appears,
set the clock using MANUAL CLOCK SET procedure on
next page.
Press on the remote for TV-VCR mode.
• Function buttons are inoperative during
Initial Setup.
• To remove a cassette during Auto Set,
press EJECT twice on the remote or
STOP twice on the unit. In this case,
settings must be made manually. (See
pages 16-17.)
• Depending on conditions, Auto Clock
Set may take longer than 30 minutes. If
so, press STOP to stop setup and
perform settings manually. (See pages
16-17.)
S U R R O U N D
ACTION
TV-VCR
SELECT
SET
POWER
Notes
PROCEEDING
AUTO CLOCK SET
CANCEL : PRESS STOP KEY
CH AUTO SET PROCEEDING
STOP
EJECT