Panasonic SC-VK960 - Manual (Page 12)

12
RQTV0239
LANG - 5
LANG - 4
FRANÇAIS
DANSK
ENGLISH
1
SINGLE CHANGE
MULTI CHANGE
OPEN/CLOSE
2
3
4
5
MIC VOL
MIC 1
MIC 2
OPEN
STOP FF REW
TAPE DVD/CD
RECORD DECK 1/2 DISPLAY
TUNER EXT-IN
DEMO
SUBWOOFER
SOUND EQ
SUPER SOUND EQ
SUPER SURROUND
SURROUND
ENHANCER
MUSIC PORT
OPEN
USB
AC IN
Disc trays
Remote control signal
sensor
[ , OPEN/CLOSE] (14)
[1 ] to [5 ]
(disc direct play) (14)
Deck 2 cassette holder
[– MIC VOL+] (28)
Deck 2 [OPEN, ] (26)
Microphone(MIC 1, MIC 2)
jacks (28)
[ , SINGLE CHANGE] (15)
AC supply indicator [AC IN]
This indicator lights when the unit is
connected to the AC mains supply.
1 Standby/on switch [ /l]
Press to switch the unit from on
to standby mode or vice versa.
In standby mode, the unit is still
consuming a small amount of
power.
Deck 1 cassette holder
7 [– VOLUME +] (28)
Deck 1 [ , OPEN] (26)
[SUBWOOFER] (30)
[SUPER SOUND EQ] (30)
[SUPER SURROUND] (30)
4 [BAND, TUNER] (26)
2 [ , USB] (33)
[SURROUND ENHANCER] (30)
Headphone jack
Avoid listening for prolonged
periods of time to prevent hearing
damage.
Plug type: Ø3.5 mm stereo
(not included)
[DISPLAY, –DEMO] (10)
[DECK 1/2] (26)
[ , RECORD] (27)
[ , MULTI CHANGE] (15)
6 [ , TAPE] (26)
5 [ , DVD/CD] (14)
[ , STOP] (14)
Disc skip/search, tape
fast-forward/rewind,
tuning, time adjustment
[
, / REW],
[ , / FF] (14, 26, 31)
USB port (33)
The QUICK SETUP screen assists you to make necessary settings.
Turn on the television and select the appropriate video input on the television.
1 2 3
(Press and hold)
4 5 6
Switch on the
unit.
Select “DVD/CD”. Shows the QUICK
SETUP screen.
Follow the
messages
and make the
settings.
Finish the QUICK
SETUP.
Exit.
Overview of controls
Main unit Main unit
Refer to the numbers in parentheses for page reference. Buttons such as
➊
function the same as the controls on the
remote control.
QUICK SETUP
[SOUND EQ] (30)
Display
MUSIC PORT jack (32)
3 [EXT-IN] (32)
DEMO
DISPLAY
To select the desired display mode
Every time you press the button:
Normal Peak hold Refl ection
Off
Normal
Indicates strength of the sound in each tonal range
Peak hold
Peak sound value of each sound range (on display for about one second after it occurs).
Refl ection
Indicates the strength of the sound in each tonal range (displayed in the opposite direction of normal
mode).
For Southeast Asia
For Southeast Asia
RQTV0239_1L.indd 12 RQTV0239_1L.indd 12 6/12/07 12:35:42 PM 6/12/07 12:35:42 PM