6 date and time, Date and time, 6 date and time – Panasonic KX-FLB811 User Manual
Page 26
2. Preparation
24
For assistance, please visit http://www.panasonic.com/consumersupport
2.6 Date and time
You must set the date and time.
1
Press {MENU}.
SYSTEM SETUP
PRESS [( )]
2
Press {#}, then {1}{0}{1}.
SET DATE & TIME
PRESS SET
3
Press {SET}.
L
The cursor (
|
) will appear on the display.
M:
|
01/D:01/Y:06
TIME: 12:00AM
4
Enter the current month/date/year by
selecting 2 digits for each.
Example: August 10, 2006
Press {0}{8} {1}{0} {0}{6}.
M:08/D:10/Y:06
TIME:
|
12:00AM
5
Enter the current hour/minute by selecting 2
digits for each. Press {*} to select “
AM” or
“
PM”.
Example: 10:15PM (12 hour clock entry)
1. Press {1}{0} {1}{5}.
M:
|
08/D:10/Y:06
TIME: 10:15AM
2. Press {*} repeatedly to display “
PM”.
M:
|
08/D:10/Y:06
TIME: 10:15PM
6
Press {SET}.
SETUP ITEM [
]
7
Press {MENU} to exit.
Note:
L
The other party’s fax machine will print the
date and time on the top of each page you
send according to your unit’s date and time
setting.
L
The accuracy of the clock is approximately
±60 seconds a month.
L
After setting the date and time, if the unit is in
the copy mode, change to the fax mode by
pressing {FAX}. You can check your unit’s
date and time setting on the display.
To correct a mistake
Press {<} or {>} to move the cursor to the
incorrect number, and make the correction.
If you have subscribed to a Caller ID
service
The date and time will be automatically set
according to the received caller information.
L
If the time has not previously been set, Caller
ID will not adjust the clock.
{
SET}
{
FAX}
{<}{>}
{
MENU}
FLB811-PFQX2307ZB-en.book Page 24 Thursday, February 16, 2006 3:57 PM