Panasonic KX-FLB811 - Manual (Page 69)

9. Help
67 For assistance, please visit http://www.panasonic.com/consumersupport
9.2 Error messages – Display
If the unit detects a problem, one or more of the following messages will appear on the display.
Display Cause & Solution
“ CALL SERVICE” L There is something wrong with the unit. Contact our service
personnel.
“ CARRIAGE ERROR” L There is something wrong with the carriage sensor. Contact our
service personnel.
“ CHANGE DRUM”
“ CHANGE SUPPLIES”
L There is something wrong with the drum unit. Replace the drum
unit and the toner cartridge (page 76).
“ CHECK DOCUMENT” L The document was not fed into the unit properly. Re-insert the
document. If misfeeding occurs frequently, clean the document
feeder rollers (page 87) and try again.
“ CHECK DRUM” L The drum unit is not inserted properly. Re-insert it correctly (page
13).
“ CHECK MEMORY” L The memory (telephone numbers, parameters, etc.) has been
erased. Re-program.
“ CHECK PICK UP
INPUT TRAY #1”
L Recording paper was not fed into the unit properly. Re-insert the
recording paper (page 82).
Note:
L “ #1”: Paper input tray
L “ #2”: Manual input tray
“ CLOSE ADF COVER” L The ADF cover is open. Close it.
“ DIRECTORY FULL” L There is no space to store new items in navigator directory. Erase
unnecessary items (page 32).
“ DRUM LIFE LOW
REPLACE SOON”
L The drum life is near to an end. Replace the drum unit as soon as
possible (page 76).
“ FAX IN MEMORY” L The unit has a document in memory. See the other displayed
message instructions to print out the document. For fax memory
capacity, see page 90.
L If feature #442 is set to “ ALWAYS” (page 64), check the connection
between the computer and the unit.
“ KEEP COPYING” L Copying has stopped due to a lack of recording paper or
misfeeding of recording paper. See the other displayed message
instructions to continue copying.
“ LOW TEMP.” L The inside of the unit is extremely cold and cannot be operated.
Use the unit in a warmer area. While the unit cannot be operated,
the received documents are temporarily stored into the memory,
and will be printed out automatically when the unit warms up.
“ MEMORY FULL” L When performing memory transmission, the document being
stored exceeded the memory capacity of the unit. Send the entire
document manually.
L When making a copy, the document being stored exceeded the
memory capacity of the unit. Press {STOP} to clear the message.
Divide the document into sections.
FLB811-PFQX2307ZB-en.book Page 67 Thursday, February 16, 2006 3:57 PM