Pioneer PDP-6100HD - Manual (Page 13)

English
6
En
q POWER ON/STANDBY
Switches the power on/standby.
(This does not operate when STANDBY/ON indicator
of the main unit is off.)
w OFF TIMER
Activates the off timer for the unit.
e DISPLAY
Displays the source settings on the screen.
r SCREEN SIZE
Automatically detects the signal and sets the aspect
ratio.
SCREEN SIZE button is not active for all signals.
t MENU/SET
Press this button to access the OSD controls.
Press this button during the display of the main menu
to go to the sub menu.
y CURSOR (▲ / ▼ / ᮤ / ᮣ )
Use these buttons to select items or settings and to
adjust settings or switch the display patterns.
u EXIT
Press this button to exit the OSD controls in the main
menu. Press this button during the display of the sub
menu to return to the previous menu.
i MUTING
Mutes the sound.
o VOLUME (+ /–)
Adjusts the sound volume.
!0 ZOOM (+ /–)
Enlarges or reduces the image.
!1 SINGLE
Cancels the split screen mode.
!2 SIDE BY SIDE
Press this button to show a couple of pictures in the
side-by-side mode.
!3 P IN P
Press this button to show a couple of pictures in the
picture-in-picture mode.
!4 ACTIVE SELECT
Press this button to make the desired picture activate
during split screen mode.
When the PICTURE FREEZE function is operating,
this button can be used to display still images on the
subscreen.
!5 VIDEO1, 2, 3
Press these buttons to select the input directly.
These inputs can also be selected using the INPUT
button on the monitor.
!6 COMPONENT1
Press this button to select the input directly.
This input can also be selected using the INPUT button
on the monitor.
!7 PC2/COMPONENT2
Press this button to select the input directly.
This input can also be selected using the INPUT button
on the monitor.
!8 HDMI
Press this button to select the input directly.
This input can also be selected using the INPUT button
on the monitor.
See page 30 for the details of Supported Signals.
!9 PICTURE MEMORY
Switches sequentially between picture memory settings
1 to 6.
@0 PC1
Press this button to select the input directly.
This input can also be selected using the INPUT button
on the monitor.
@1 Remote control signal transmitter
Transmits the remote control signals.
Remote Control
Part Names and Function