Pioneer PDP-6100HD - Manual (Page 37)

English
30
En
Specifications
Specifications
Screen Size 53.2"(H) ן29.9"(V) inches
1351(H) ן760(V) mm
diagonal 61"
Aspect Ratio 16 : 9
Resolution 1365(H) ן768(V) pixels
Signals
Synchronization Range Horizontal : 15.8 to 110 kHz
(automatic : step scan)
Vertical : 59.8 to 120 Hz
(automatic : step scan)
Input Signals RGB, NTSC (3.58/4.43), PAL (B,G,M,N),
PAL60, SECAM, HD*
1 , DVD* 1 , DTV* 1
Input Terminals
PC
Visual 1 (Analog) mini D-sub 15-pin ן1
Visual 2 (Analog) BNC (R, G, B, H/CS, V) ן1* 2
Video
Visual 1 BNC
ן1
Visual 2 RCA-pin
ן1
Visual 3 S-Video:DIN 4-pin
ן1
COMPONENT
Visual 1 RCA-pin (Y, PB[CB], PR[CR])
ן1* 1
Visual 2 BNC (Y, PB[CB], PR[CR])
ן1* 1, * 2
HDMI HDMI connector* 3
Audio Stereo RCA
ן3 (Selectable)
RS-232C D-sub 9-pin
ן1
Sound output 9W+9W at 6 ohm
Power Supply AC120V 60Hz
Current Rating 6.7A (maximum)
Power Consumption 540W (typical) (standby 0.9W)
Dimensions 57.9 (W)
ן34.7 (H)ן4.7 (D) inches
1470 (W)
ן880 (H)ן119(D) mm
Weight 134.5 lbs / 61.0 kg (without stand)
Environmental Considerations
Operating Temperature 0°C to 40°C / 32°F to 104°F
Other Features Motion compensated 3D Scan Converter (NTSC,
PAL, 480I, 525I, 1035I, 1080I), 2-3 pull down
Converter (NTSC, 480I, 525I, 1035I, 1080I
(60Hz)), 2-2 pull down Converter (PAL, NTSC,
480I, 525I), Digital Zoom Function (100-900%
Selectable), Self Diagnosis, Image Burn reduction
tools (ABL, INVERSE, WHITE, ORBITER,
SCREEN WIPER), Color Temperature select
(high/middle/middle low/low, user has 4
memories), Auto Picture, Input Skip, Color MGT,
Low Tone (3 mode), Gamma Correction (4
mode), Plug and play (DDC1, DDC2b, HDMI:E-
DDC),
Split screen operations
The features and specifications may be subject to change without
notice.
* 1 COMPONENT input signals supported on this system
480P (60 Hz)
480I (60 Hz) 525P (60 Hz)
525I (60 Hz) 720P (60 Hz) 1035I (60 Hz)
1080I (60 Hz)
* 2 The 5-BNC connectors are used as PC2 and COMPONENT2 input.
Select one of them under “BNC INPUT”.
* 3 HDMI input signals supported on this system.
Supported Signals
• 640
؂480P @ 59.94/60Hz
• 1280
؂720P @ 59.94/60Hz
• 1920
؂1080I @ 59.94/60Hz
• 720
؂480P @ 59.94/60Hz
• 1440 (720)
؂480I @ 59.94/60Hz
Note: In some cases a signal on the plasma monitor may not be displayed
properly. The problem may be an inconsistency with standards from
the source equipment (DVD, Set-top box, etc...). If you do experience
such a problem please contact your dealer and also the manufacturer of
the source equipment.