PAC Ipac GM3 - Manual (Page 8)

10
accessing the auxiliary Input:
Using the TUNE KNOB,(menu tabs must not be highlighted) turn the knob
in either direction until the display reads “Select AUX In.” Press the SEEK
►▌button to go to the Auxiliary input.
To return to the iPod, use the TUNE KNOB (menu tabs must not be high-
lighted) to scroll through menu options until “Select iPod” is displayed.
Press the SEEK ►▌to return to iPod.
Note: While in Auxiliary input mode there is an adjustment that can be
used to match the level of the auxiliary input source with the levels of the
other audio sources. To set the GAIN levels use the TUNE KNOB. Turn
the TUNE KNOB either direction until “Select Gain” is displayed. Press
the SEEK ►▌ button to switch between “Gain High” and “Gain Normal.”
3.1a Manual Mode
When the iPod is plugged in the default setting is for manual control of the
iPod. If you are in Advanced Mode; using the TUNE KNOB, (menu tabs
must not be highlighted) turn the knob in either direction until the display
reads “iPod Advanced.” Press the SEEK ►▌button to go to manual con-
trol of the iPod. The iPod will now be controllable using the click wheel
controls on the iPod. While in Manual Mode the display on the factory
radio will display “PAC iPod.”
3.1b advanced Mode
If you are in Manual Mode; using the TUNE KNOB, (menu tabs must not
be highlighted) turn the knob in either direction until the display reads “iPod
Manual.” Press the SEEK ►▌button to go to Advanced Mode. The factory
stereo radio buttons will now control the iPod, use of the click wheel con-
trols will be disabled while using Advanced Mode. iPod text will now be
displayed on the factory radio
Browse by artist
Press either of the preset buttons below the text “Artist” on the display
to highlight the Artist menu tab. Use the TUNE KNOB to scroll through
the artists. To select the desired artist press the SEEK ►▌button. The
“Songs” tab on the menu will become highlighted. Use the TUNE KNOB
to scroll through the songs and press the SEEK ►▌button to select the
desired song. Once the song is selected the SEEK ►▌and ▐◄ SEEK can
be used to change the track up and down within the Artist selected.