PMI - Phoenix BIGSOUND P5 - Manual (Page 4)

Getting Acquainted
One of the ideas behind the P5 system is to tailor the system to your
needs to avoid unnecessary expense. The P5 Basic (Board only) system
includes the sound board (pictured below), connectors C1 which
connects the speaker and power leads and C2 which is the computer
access jack. We also offer the P5 as a kit which includes the sound board
with a speaker and all connectors (C1, C2 and C3) appropriate to the
locomotive.
Additional components available include: volume switch [6001-
05], volume switch with reed switch[6020-05], volume switch with reed
switch and bare leads for Board Trigger 2, volume switch with bare leads
for Board Trigger 1, and volume switch with bare leads for Board
Triggers 1 & 2.
There are 3 connectors on the P5 board. The chart on the
following page shows the pin out for each. This chart also details the
length and coloring of the wire leads if you order the generic plugs.
The Sound Board & Connectors
February 2009
- 4 -
4 3 2 1
1
2
3
4
5
6
7
1
2
3
4
5
6
7
8
9
10
C1
C2
C3