Selection of aspect ratio, E-27, General operation – PLUS Vision U4-237 User Manual

Page 27

Advertising
background image

E-27

General Operation

Selection of Aspect Ratio

This function selects horizontal and vertical picture proportions of the input
signal.

Press the ASPECT button while viewing the projected image and select the
aspect ratio.

Personal Computer Signal
Each press of the ASPECT button advances the selection one step in the se-
quence of Auto

→ Direct → Real, and then repeats.

Auto ............ Automatically enlarges or reduces the image to project a full screen in a ratio

of 4:3

Direct .......... Maintains the aspect ratio and projects a picture of the maximum displayable

size

Real ............ Projects the input signal without pixel conversion.

RGB

STANDBY

VIDEO

FREEZE

MUTE

ECO

AUTO

TIMER

VOL

KSTN

ZOOM

CANCEL

QUICK

MENU

ENTER

Q

1

2

3

4

ASPECT

Input Signal

Auto

Direct

Real

The setting is higher
than the display reso-
lution of the projector.

The setting is lower
than the display reso-
lution of the projector.

Note:
The “Real” setting under “Aspect” for digital RGB signals can only be adjusted when the input signal is of XGA size or smaller.

Note:
When selection has been made for the “Real” setting of the personal computer signal (i.e., when the input signal and the projector display
resolution are high) and the “Zoom” setting of the video signal, pressing the SELECT

̆̄̇̈

buttons on the remote control will permit

movement of the display position. Note that there will not be any movement when the menu or the quick menu is displayed.

Video Signals / Component Signals
Each press of the ASPECT button advances the selection one step in the sequence of Auto

→ Wide → Zoom, and then repeats.

Auto ............ While maintaining the aspect ratio, projects a full screen so that no portions extend beyond the boundaries of the screen. The top

and bottom of the 16:9 image becomes black.

Wide ........... Projects to fill the full width with the entire image at 16:9.

(This feature is used to project a squeezed image in a proper aspect ratio.)

Zoom .......... Projects only the 4:3 portion within 16:9 image to fill the screen.

(Portion that extend off screen is cut.)

Aspect ratio selection

Auto

Wide

Zoom

4:3 screen

16:9 screen

Advertising