Primera Technology FX400 - Manual (Page 16)

16
Section 4: Adjusting Offsets
If the foil border or graphic is not aligned properly on your LX label, you can adjust
the placement by following this procedure.
Note: It is also possible the FX image itself is offset within the page size of the
actual file. If this is the case, it is best to adjust the file. This way you will not
permanently change the offsets of the printer for other properly designed label that
might have printed correctly in the past.
1. Go to Start – Printers and Faxes. Right click on the FX400. Choose Printing
Preferences.
2. Go to the Page Setup Tab.