Primera Technology FX400 - Manual (Page 19)

19
4. Close the top cover of the printer making sure at least one label is sticking out of
the front. Failure to do this could cause feeding/alignment issues when sending the
print job.
5.
Design your label using any design software. Keep in mind the page size of the
design should be the same as the dimensions of the label stock you are intending to
print on. The design should be monochrome black only.
6. To imprint foil or laminate, go to the file
menu of the design application, choose print.
Choose the FX400 as the printer. Set the
number of copies and print.
Note: You can also choose to print from the
PTFoil application by checking the FOIL ONLY
box.