Panasonic DVCPRO AJ-PCS060G - Manual (Page 21)

E-20
ENGLISH
P2 Store Manager
Using the P2 Store Manager application, you can display the status of the AJ-PCS060G and
manage the unit in several ways.
HDD status display
You can check the unit’s HDD partition information, self-diagnostic information, and more.
AJ-PCS060G setup
You can customize operating parameters for the unit, including enabling or disabling auto
power OFF.
AJ-PCS060G software updates
You can download software from the Panasonic website to keep the unit up to date.
Features
Starting and closing P2 Store Manager
1. Use the USB 2.0 cable to connect the unit to the computer
2. Turn the unit ON by pressing the [POWER] button
On the unit, the POWER LED lights in green, and the connection is automatically detected.
3. Start P2 Store Manager
Windows XP Professional:
Go to [Start]
→ [All Programs] → [Panasonic P2] → [P2 Store Manager].
Windows 2000:
Go to [Start]
→ [Programs] → [Panasonic P2] → [P2 Store Manager].
4. Make sure the indicator in the lower-left corner of the P2 Store Manager screen displays
“State: Connecting.”
You can now display the unit’s status and manage it. (See page E-21)
5. To close P2 Store Manager, click the button in the upper-right corner
The P2 Store Manager screen is closed.
Your computer must meet these requirements for P2 Store Manager.
Operating system: Windows XP Professional SP2 or later
Windows 2000 SP4 or later
RAM: 256 MB or more (512 MB or more recommended)
Processor: Pentium4 processor 1.0 GHz or higher
(Pentium4 processor 1.5 GHz or higher recommended)
Interface: Equipped with a USB 2.0 port
System requirements
P2 Store Manager is installed automatically when you install P2 Driver from the CD-ROM on your
computer. For instructions on installation and uninstallation, refer to the included Install Manual.
Installation/uninstallation