Pioneer CDJ-850 - Manual (Page 14)

14 DRB1526-A
En 14
— When pressed once, the main unit display’s time display mode
(remaining time display or elapsed time display) switches.
— When pressed for over 1 second, auto cue turns on and off.
i Main unit display (page 15)
j BROWSE (page 17)
Press this to display the [BROWSE] screen.
k TAG LIST (page 18)
Press this to display the [TAG LIST] screen.
l INFO (page 19)
Press this to display the [INFO] screen.
m MENU (UTILITY) (page 24)
— When pressed once, the menu screen is displayed.
— The [UTILITY] screen is displayed when this is pressed for over
1 second.
n BACK (page 18)
— Press this once to return to the previous screen.
— Press for over 1 second to move to the top layer.
o TAG TRACK/ REMOVE (page 18)
Use these to add and remove tracks from the tag list.
p Rotary selector (page 20)
— Turn the rotary selector to select tracks or folders.
— Press the rotary selector to enter.
q STANDBY indicator (page 25)
This lights when the auto standby function is activated.
r DISC EJECT h (page 17)
Use this to eject discs.
s CUE/LOOP CALLc/ d (page 22)
Use these to call out cue and loop points stored on the USB device.
t DELETE (page 22)
Use this to delete cue and loop points stored on the USB device.
u MEMORY (page 22)
Use this to store cue and loop points on the USB device.
v VINYL SPEED ADJUST TOUCH/RELEASE (page 23)
Use this to adjust the speed at which playback slows down and stops
when the top of the jog dial is pressed and the speed at which normal
playback resumes when the top of the jog dial is released.
w VINYL (JOG MODE) (page 23)
Use this to switch the jog dial mode.
x TEMPO ±6, ±10, ±16, WIDE (page 23)
Use this to switch the playing speed adjustment range.
y MASTER TEMPO (page 23)
Use this to turn the master tempo function on and off.
z TEMPO (page 23)
Use this to adjust the track playing speed.
A Jog dial (page 23)
This can be used for such operations as scratching, pitch bending,
etc.
B Jog dial display section (page 15)
Rear panel
C u (power switch)
This switches this unit’s power between on and standby.
D AC IN (page 16)
Connect this to a power outlet.
Connect the power cord after all the connections between devices
have been completed.
Be sure to use the included power cord.
E Kensington security slot
F USB (page 16)
Connect to a computer.
G CONTROL (page 16)
Connect the control cord (included) here.
H AUDIO OUT L/ R (page 16)
Connect the audio cables (included) here.
Front panel
I Disc insertion slot
J Disc force eject pin insertion hole