Using the hdmi inputs, Connecting hdmi equipment, Using with other equipment 10 – Pioneer PureVision PDP-507XG User Manual

Page 43

Advertising
background image

Using with other equipment

10

43

En

English

5

Press HOME MENU to exit the menu.

Note

• The INPUT 4 video signal is not output from the MONITOR OUT

jack regardless of this setting.

Using the HDMI Inputs

The INPUT 3 and INPUT 4 terminals include HDMI terminals to
which digital video and audio signals can be input. To use the
HDMI terminals, activate the terminal and specify the types of
video and audio signals to be received from the connected
equipment. For the types of these signals, see the operation
manual that came with the connected equipment.

Before starting the menu, press

INPUT 3 or INPUT 4 on the remote

control unit or press

INPUT on the plasma display to select INPUT

3 or INPUT 4.

For audio, the system supports the following:

• Linear PCM (STEREO 2ch)

• Sampling frequency: 32 kHz, 44.1 kHz, 48 kHz

Note

• PC signals are not compatible with the HDMI terminal.

• It may take a short while until the image is displayed,

depending on the equipment connected.

Connecting HDMI equipment

There are two HDMI inputs, labeled INPUT 3 and INPUT 4.

For INPUT 3, connect an HDMI cable for the video and (if
necessary) a stereo audio cable for analog audio. You can select
the audio and video format according to the device you’ve
connected – see below for more.

For INPUT 4, connect just an HDMI cable – this carries both the
audio and video signals.

Item

Description

Always Output

Outputs composite video and audio signals no matter
which input source is selected.

INPUT 1 Prohibit

Does not output composite video and audio signals
when INPUT 1 is selected.

INPUT 2 Prohibit

Does not output composite video and audio signals
when INPUT 2 is selected.

INPUT 3 Prohibit

Does not output composite video and audio signals
when INPUT 3 is selected.

INPUT 4 Prohibit

Does not output composite video and audio signals
when INPUT 4 is selected.

INPUT 5 Prohibit

Does not output composite video and audio signals
when INPUT 5 is selected.

Input signal correlation table

1920 x 1080i@50 Hz

720 x 576p@50 Hz

1280 x 720p@50 Hz

720(1440) x 576i@50 Hz

1920 x [email protected] Hz/60 Hz

720 x [email protected] Hz/60 Hz

1280 x [email protected] Hz/60 Hz

720(1440) x [email protected] Hz/60 Hz

1920 x 1080p@24 Hz

3

4

HDMI device

HDMI cable carrying
the HDMI mark

Stereo audio
cable

PDP-427XG (rear)

3

4

HDMI device

HDMI cable carrying
the HDMI mark

PDP-427XG (rear)

Advertising
This manual is related to the following products: