Panasonic DMC-TZ1GK User Manual
Page 15
15
• 4. How to read the error code:
One error code is displayed for 8 bit, the contents of error codes is indicated the table as shown below.
Attribute
Main item
Sub item
Error code
Contents (Upper)
High 4 bits Low 4 bits
Check point (Lower)
LENS
Lens drive
OIS
1800
1000
PSD (X) error. Hall element (X axis) position detect error in OIS unit.
OIS Unit
2000
PSD (Y) error. Hall element (Y axis) position detect error in OIS unit.
OIS Unit
3000
GYRO (X) error. Gyro (IC7101: X axis) detect error on Main P.C.B..
IC7101 (Gyro element) or IC6001 (VENUS 3)
4000
GYRO (Y) error. Gyro (IC7101: Y axis) detect error on Main P.C.B..
IC7101 (Gyro element) or IC6001 (VENUS 3)
5000
MREF error (Reference voltage error).
IC7001 (LENS drive) or IC6001 (VENUS 3)
6000
Drive voltage (X) error.
OIS Unit, LENS flex breaks etc.
7000
Drive voltage (Y) error.
OIS Unit, LENS flex breaks etc.
C.B./Zoom
0100
HP Low detect error (C.B. encoder (full retract) always Low detect).
FP9004-(6, 7) signal line or IC6001 (VENUS 3)
0200
HP High detect error (C.B. encoder (full retract) always High detect).
FP9004-(6, 7) signal line or IC6001 (VENUS 3)
0300
ENC1 detect error (C.B. motor encoder detect error).
Zoom motor, Motor driver, Zoom pulse encoder 1.
0400
ENC2 detect error (C.B. motor encoder detect error).
Zoom motor, Motor driver, Zoom pulse encoder 2.
Zoom
0010
HP Low detect error (Zoom encoder always Low detect error).
0020
HP High detect error (Zoom encoder always High detect error).
Focus
0001
HP Low detect error (Focus encoder always Low detect error).
FP9004-(6, 7) signal line or IC6001 (VENUS 3)
0002
HP High detect error (Focus encoder always High detect error).
FP9004-(6, 7) signal line or IC6001 (VENUS 3)
0005
Focus lock error (Focus is not possible to drive to a specified position).
Obstacle mixing, Focus MR sensor output, Motor driver.
0006
Focus comparate sinal (phase A) is irregular.
Focus Motor, Focus MR sensor output, Motor driver.
0007
Focus comparate sinal (phase B) is irregular.
Focus Motor, Focus MR sensor output, Motor driver.
0008
Focus reference voltage is irregular.
Motor driver.
Lens
1801
0000
Power ON time out error.
Lens drive system
1802
0000
Power OFF time out error.
Lens drive system