Panasonic DP-C213 - Manual (Page 46)

46
Chapter 4 Fax/Email Settings
Fax Parameters
No. Parameter Comments Selective Item Standard
Setting
0 - 39 00 Print FaxParameterList Print a fax parameter list.
To cancel printing the fax
parameter list, press “Stop” and
“OK”.
While processing the
cancellation, panel operation is
denied, and an error beep is
produced.
The feeding paper(s) will be
ejected before completing the
above cancellation operation.
If setting a parameter, an
asterisk mark (*) will be added
before the parameter number.
Stop, Start Start
01 Density (HOME) Set the default density according
to the most-used original. -3, -2, -1, 0, 1, 2, 3 0
02 Resolution (HOME) Set the default resolution
according to the most-used
original.
z When installing the optional
Email / Fax, the standard
setting can be changed.
STD, Fine, S-Fine Fine
03 Original (HOME) Set the default of original type
according to the most-used
original. Text,
Txt/Pht (Text/Photo),
Photo Text
04 Stamp (HOME) When set to “On”, all
successfully transmitted
originals are stamped (Memory
or Direct transmission).
In order Not to stamp the
Memory transmitted originals,
set “28 Stamp At Memory XMT”
to “Invalid”. Off, On Off
05 Memory (HOME) Set the default for memory
transmission.
When set to “Off”, originals are
transmitted directly without
storing into memory first. Off, On On
06 Dialing Method Select a dialing method
according to your telephone line. Tone, Pulse Tone