Panasonic DP-C213 - Manual (Page 77)

77
Chapter 4 Fax/Email Settings
6
Select “120-159”, and then select
(4 times).
z Fax Parameters can be directly selected
using a keypad for quick operation. If a
Parameter No. is known, enter the desired
Parameter No. with a keypad, and then
press the "Start" key.
Ex: In step 6, enter “142” with a keypad, and
press the “Start” key to select “142
Relay XMT”.
7
Select “142 Relay XMT”.
8
Select “Valid”, and then select “OK”.
z Advance to Relay XMT Report (Fax
parameter 143) (see page 77), and set the
relay XMT report.
Relay XMT Report (Fax
parameter 143)
Selecting how the Relay XMT Report is sent to
the originator.
1
Select “143 Relay XMT Report”.
2
Select how the Relay XMT Report is
sent, and then select “OK”.
3
Select “Close”.
z Advance to Relay XMT Password (User
parameter 36) (see page 78), and set the
relay transmission password.