Immobilizerdevice enabled indicator led, Operation – Piaggio 250 i.e. User Manual

Page 20

Advertising
background image

Immobilizerdevice enabled indicator led (01_19)

Activation of the "PIAGGIO IMMOBILIZER" system is signalled by a flashing «A» indi-
cator. In order to reduce battery discharge, the indicator LED turns off automatically after
48 hours of uninterrupted functioning. Should the signal led system break down in its
flashing function, give information about the type of problem to an Authorised Piaggio-
Gilera Service Centre
.

Operation

Every time the starter key is removed in the "OFF" or "LOCK" position, the safety system
activates the immobilizer system. Turning the key to "ON" disables the engine lock, pro-
vided that the safety system recognises the code transmitted by the key. If the code is not
recognised, turn the key first to "OFF" and then to "ON"; if the lock cannot be disabled,
try with the other key supplied (red-coloured). If the engine cannot be started, contact an
Authorised Piaggio Service Centre, which is provided with the electronic equipment
required to detect and repair the system.

When additional keys are required, please note that data storage (up to 7 keys max.) must
be done on all keys, both new ones and existing ones.

Take the red-handgrip key and all the black keys supplied to an Authorised Piaggio
Service Centre
.

The codes of keys not submitted for the new storage procedure are deleted from the
memory. Any lost keys will therefore not be enabled to start the engine.

WARNING

EACH KEY HAS ITS OWN AND UNIQUE CODE, WHICH MUST BE STORED BY THE
SYSTEM CONTROL UNIT.

VIOLENT SHOCKS MAY AFFECT THE ELECTRONIC COMPONENTS OF THE KEY.

20

1 Vehicle

Advertising