Pioneer BONUSVIEW BDP-09FD - Manual (Page 25)

25
En
03
Switching the video output
terminal to be viewed
Use the procedure below to switch the video output signal to be
viewed between the one output from the
HDMI OUT (MAIN) terminal,
the HDMI OUT (SUB) terminal and an analog output terminal
( COMPONENT VIDEO, S-VIDEO or VIDEO output terminals).
The settings below are valid for the selected video output terminal.
• The output video resolution (below)
• The Lip Sync function (page 42)
• The Pure Audio function (page 53)
 Press VIDEO SELECT.
• The current video output terminal is displayed on the TV screen
and on the player’s front panel display.
To switch the video output terminals, press
VIDEO SELECT
again or press /.
Caution
• The picture may not be displayed for a while when the video
output terminal is switched.
• Depending on the player’s settings, the picture of a TV
connected to a terminal other than the selected video output
terminal may not be properly displayed.
• When Pure Audio is set to Mode 2, no picture will be output
from any video output terminal other than the selected one
(page 53).
Switching the output
video resolution
Use the procedure below to switch the output video resolution from
the various video output terminals.
 Press OUTPUT RESOLUTION.
• The current output video resolution setting is displayed on the
TV screen and on the player’s front panel display.
To switch the output video resolution, press
OUTPUT
RESOLUTION again or press /.
• The output video resolution depends on the video output
terminal. (page 26)
• The output video resolution setting can also be switched by
pressing RESOLUTION on the player’s front panel.
• The output video resolution setting can also be switched by
selecting Output Video Resolution from the TOOLS menu.
Caution
• On some devices (TV, AV receiver or amplifier, etc.), the video or
audio may not be output properly when the resolution is
switched. If this happens, use
OUTPUT RESOLUTION to set a
resolution at which the video and audio are properly output.
• When video signals are being output with a resolution of 1080/
24p, 1080/60i, 1080/60p or 720/60p from the HDMI OUT
terminals or COMPONENT VIDEO output terminals, the picture
may be output with an aspect ratio of 16:9, even if the TV Aspect
Ratio is set to 4:3 (Standard).
• The picture may not be displayed for a while when the resolution
is switched.
 About Film material
The film material is a video signal with a frame rate of 24 frames/
second. For example, these materials include 1080/24p, 720/24p,
etc.
 To output film material
To output 1080/24p film material from HDMI OUT terminals, set the
output video resolution to either Auto, 1080/24p or Source Direct.
Caution
• 1080/24p signals can only be output from the HDMI OUT
terminals. They cannot be output from other video terminals.
• When Auto is selected, the picture is output at 60 frames/
second if your TV is not compatible with 1080/24p signals.
• When 1080/24p or Source Direct is selected, the signals are
output as such, even if your TV is not compatible with 1080/24p
signals. If the picture is not displayed properly, use
OUTPUT
RESOLUTION to set an output video resolution at which the
video and audio signals are properly output.
• Even if Auto, 1080/24p or Source Direct is selected, 720/24p
video signals are output at 60 frames/second.
• When 1080/24p is selected, the motion may be unnatural or the
picture may not be clear, depending on the source. In this case,
set the resolution to something other than
1080/24p.
VIDEO SELECT PLAY MODE
HOME MEDIA
GALLERY
MENU
DISPLAY POPUP MENU
TOP MENU TOOLS
AUDIO VIDEO
SECONDARY OUTPUT
RESOLUTION
HDMI MAIN (Source Direct)


Video Output Terminal
Output video resolution setting of
selected video output terminal Example:
CLEAR ENTER
VIDEO SELECT PLAY MODE
HOME MEDIA
GALLERY
MENU
DISPLAY POPUP MENU
AUDIO VIDEO
SECONDARY OUTPUT
RESOLUTION
Auto


Output Video Resolution Source : 1080/60i
Current Output : 1080/60i
Video resolution of the
currently playing disc
Output video resolution
from the player
Example:
Auto
Output Video Resolution Source : 1080/24p
Current Output : 1080/24p
Video resolution of the
currently playing disc
Output video resolution
from the player
Example: