Kuro link others – Pioneer BONUSVIEW BDP-09FD User Manual
Page 69
69
En
07
KURO LINK
Others
Problem
Check
Remedy
KURO LINK function does
not work.
• Is the HDMI cable properly connected?
• Are you connected to the
HDMI OUT (SUB) terminal?
To use the KURO LINK function, connect the Flat Panel TV and
AV system (AV receiver or amplifier, etc.) to the
HDMI OUT
(MAIN) terminal (page 16).
Is the HDMI cable you are using a High Speed HDMI™ cable? Use a High Speed HDMI™ cable. The KURO LINK function
may not work properly if HDMI cable other than a High Speed
HDMI™ cable is used.
Is
KURO LINK set to On on the player?
Set
KURO LINK to On on the player (page 45).
Does the connected device support the KURO LINK function? • The KURO LINK function will not work with devices
manufactured by companies other than Pioneer, even when
connected using an HDMI cable.
• The KURO LINK function will not work if devices that do not
support the KURO LINK function or devices manufactured by
companies other than Pioneer are connected between the
KURO LINK-compatible device and the player.
• Even when connected to a Pioneer product compatible with
the KURO LINK function, some of the functions may not work.
Also refer to the operating instructions of the connected
device.
Is KURO LINK set to On on the connected device?
Set KURO LINK to On on the connected device. The KURO
LINK function operates when KURO LINK is set to On for all
devices connected to the
HDMI OUT (MAIN) terminal.
Once connections and settings of all the devices are finished,
be sure to check that the player’s picture is output to the Flat
Panel TV. (Also check after changing the connected devices
and connecting and/or disconnecting HDMI cables.) If the
player’s picture is not being output to the Flat Panel TV, the
KURO LINK function may not work properly.
For details, refer to the operating instructions of the connected
device.
Are multiple players connected?
The KURO LINK function may not work if three or more players,
including this player, are connected by HDMI cable.
Problem
Check
Remedy
The player’s power turns off
automatically.
Is
Auto Power Off set to On?
If
Auto Power Off is set to On, the player’s power turns off
automatically if no operation is performed for over 30 minutes
(page 46).
The player’s power turns on
or off automatically.
Is
KURO LINK set to On?
The player’s power may turn on and off together with the power
of the TV connected to the
HDMI OUT (MAIN) terminal. If you
do not want the player’s power to turn on and off when the TV’s
power is turned on and off, set
KURO LINK to Off (page 45).
Player cannot be operated
with remote control.
Is an AV receiver or amplifier connected to the
CONTROL IN
terminal on the player’s rear panel?
Operate with the remote control of the device connected to the
CONTROL IN terminal.
Are you operating the remote control from a point too far away
from the player?
Operate from within 23 feet of the remote control sensor.
Are the batteries dead?
Replace the batteries (page 7).
Input of connected TV and AV
system switches
automatically.
Is
KURO LINK set to On?
The input of the TV and AV system (AV receiver or amplifier,
etc.) connected to the
HDMI OUT (MAIN) terminal may
automatically switch to the player when playback starts on the
player or the menu screen (Home Media Gallery, etc.) is
displayed. If you do not want the inputs of the connected TV
and AV system (AV receiver or amplifier, etc.) to switch
automatically, set
KURO LINK to Off (page 45).