Panasonic KX-TG5671 - Manual (Page 12)

Preparation
12 For assistance, please visit http://www.panasonic.com/phonehelp
Setting up the handset
Connecting the charger
L Use only the included Panasonic AC
adaptor KX-TCA1 or PQLV256.
Battery installation/replacement
1
Press the notch of the handset cover
firmly, and slide it in the direction of the
arrow.
L
If necessary, remove the old battery.
2
Insert the battery ( A), and press it
down until it snaps into position ( B).
Then close the handset cover.
Important:
L
Use only the rechargeable Panasonic
battery noted on page 7.
Available model:
KX-TG5672/KX-TG5673
Fasten the AC adaptor cord to prevent
it from being disconnected.
(120 V AC, 60 Hz)
Bottom of the charger
Hooks
A
B
TG5671_72_73(e).book Page 12 Wednesday, January 11, 2006 7:03 PM