Panasonic KX-TG5671 - Manual (Page 44)

Multi-unit Operation
44 For assistance, please visit http://www.panasonic.com/phonehelp
1
{ INTERCOM}
2
Press {1}, {2}, or {3}.
L
The destination unit beeps for 1
minute.
L To stop paging, press {SP-PHONE}
or {INTERCOM}.
3
To end the intercom call, press {SP-
PHONE}.
Answering an intercom call
1
Press {C} to answer the page.
2
To end the intercom call, press {OFF}.
1
Press {SP-PHONE} or {INTERCOM}
to answer the page.
2
To end the intercom call, press {SP-
PHONE}.
Note for handset and base unit:
L When the ringer volume is set to off, the
handset or the base unit rings at the low
level for intercom calls.
Transferring calls,
conference calls
Outside calls can be transferred between
the handset and base unit, and between 2
handsets. The handset and base unit, or 2
handsets can have a conference call with
an outside party.
1
During an outside call, press
{
INTERCOM} to put the call on hold.
2
KX-TG5671
Press {base}.
KX-TG5672/KX-TG5673
To page the base unit, press {0}.
To page another handset, enter its
extension number ({1}
–
{3}).
3
Wait for the paged party to answer.
L
If the paged party does not answer,
press {C} to return to the outside
call.
4
To complete the transfer, press {OFF}.
L The outside call is being routed to the
unit.
To establish a conference call, press
{
Conf}.
L To leave the conference, press
{
OFF}. The other parties can
continue the conversation.
L To put the outside call on hold, press
{
HOLD}. To resume the conference,
press {Conf}.
Base unit
Handset
Base unit
Handset
TG5671_72_73(e).book Page 44 Wednesday, January 11, 2006 7:03 PM