Panasonic KX-TG5671 - Manual (Page 21)

Making/Answering Calls
For assistance, please visit http://www.panasonic.com/phonehelp 21
Using the base unit
1
{
SP-PHONE}
2
Speak into the MIC.
3
When you finish talking, press {SP-
PHONE}.
Adjusting the ringer volume
Press {^} or {V} repeatedly to select the
desired volume when in standby mode.
L To turn the ringer off, press and hold {V}
until the unit beeps 2 times.
Setting the ringer tone
There are 3 tones.
1
Press {^} or {V}.
2
Within 10 seconds, press {<} or {>}
repeatedly to select the desired tone.
Useful features during a
call
HOLD button
This feature allows you to put an outside
call on hold.
1
Press {HOLD} during an outside call.
L To transfer the call to another
extension, continue from step 2 on
page 44, “Transferring calls,
conference calls”.
2
Press {HOLD} again.
L To release the hold, press {C}.
L The base unit user can take the call
by pressing {SP-PHONE}.
L
Another handset user can take the
call by pressing {C}.
Press {HOLD} during an outside call.
L
To release the hold, press {SP-
PHONE}.
L
Handset users can take the call by
pressing {C}.
Note for handset and base unit:
L
If another phone is connected on the
same line (page 11), you can also take
the call by lifting its handset.
L
If a call is kept on hold for more than 6
minutes, an alarm tone starts to sound.
After 4 additional minutes on hold, the
call is disconnected.
Handset
Base unit
TG5671_72_73(e).book Page 21 Wednesday, January 11, 2006 7:03 PM