Panasonic KX-TG5671 - Manual (Page 28)

Caller ID Service
28 For assistance, please visit http://www.panasonic.com/phonehelp
Using Caller ID service
This unit is Caller ID compatible. To use
Caller ID features, you must subscribe to
your telephone company’s Caller ID
service.
Caller ID features
When an outside call is being received, the
calling party’s name and telephone
number are displayed.
Caller information for the last 50 different
callers is logged in the caller list by the
most recent call to the oldest.
L
Generally caller information is displayed
from the 2nd ring.
L If the unit cannot receive caller
information, the following is displayed:
– “Out of area”: The caller dialed
from an area which does not provide
Caller ID service.
– “Private caller”: The caller
requested not to send caller
information.
– “Long distance”: The caller called
you long distance.
L
If the unit is connected to a PBX system,
caller information may not be received
properly. Consult your PBX supplier.
Missed calls
If a call is not answered, the unit treats the
call as a missed call. The number of
missed calls is shown on the handset
display. This lets you know if you should
view the caller list to see who called while
you were out.
L
The number of missed calls can also be
shown on the multiple handsets (KX-
TG5672/KX-TG5673, page 30).
Call Waiting Caller ID display
If you subscribe to both Caller ID and Call
Waiting with Caller ID services, the 2nd
caller’s information is displayed after you
hear a Call Waiting tone (page 22). Please
contact your telephone company for
details and availability of this service in
your area.
Talking Caller ID
This feature lets you know who is calling
without looking at the display. When a call
comes in, the handset and base unit
announces the caller’s name displayed on
the handset following every ring.
To use this feature, you must subscribe to
your telephone company’s Caller ID
service.
L
Name pronunciation may vary. This
feature may not pronounce all names
correctly.
L
Caller ID supports names of up to 15
letters. If the caller’s name has more
than 15 letters, the name is not
displayed or announced correctly.
L
Usually the unit announces the caller’s
name after the 2nd ring. If you turn on
the answering system and set the ring
count to “2” (page 41), the unit does not
announce the caller’s name. If “Toll
saver” is selected and there is a new
message, the unit does not announce
the caller’s name.
L
When you receive a call while on the
phone, the 2nd caller’s name is not
announced even if you subscribe to both
Caller ID and Call Waiting with Caller ID
services.
L This feature can be turned on or off
(page 35).
TG5671_72_73(e).book Page 28 Wednesday, January 11, 2006 7:03 PM