Step 3: installing ink cartridges – Primera Technology II User Manual
Page 14
10 Hardware and Software Set-Up
• Load the
Input Bin
(the bin located on the right-hand side
of the Publisher) with 25 blank discs and place the bins on
the mounting pegs.
Step 3: Installing Ink Cartridges
• Press the Ink Cartridge Button to move the Ink
Cartridge Carrier to the load position and open the ink
cartridge covers
• Remove each ink cartridge from its packaging
• Slowly remove the tape covering
the cartridge's print head, being
careful to avoid damaging the
barcode label on the underside of
the cartridge.
DO NOT TOUCH THE COPPER AREA!
• Insert the ink cartridges into the carrier, copper end first
and snap the cartridge cover in place. Insert the color
in the left holder, monochrome black in the right
cartridge holder.
• Close the Publisher’s front cover.
Color
Black
510873.qxd 1/5/2004 9:59 AM Page 10
TOC
INDEX