Primera Technology II - Manual (Page 27)

Creating Discs 23
Select the Details button for information on the drivers,
firmware, alignment and number of discs printed with
your Publisher.
Disc Output Location
This can be set either Normal (Left Bind acts as output), or
Kiosk (finished discs deposited out the Front Exit). The default
is Normal (Left Bin). Note that this will only have an effect
when doing printing only − this will have no affect when
recording and printing through PrimoDVD. In PrimoDVD,
click Robotics then Options and select Kiosk Mode check box.
Enable Bi-di Printing
When enabled the Bravo will print bi-directional for faster
printing. The default is uni-directional printing. When you
enable bi-directional printing, you should perform the
Alignment Calibration described later in this section. Please
note that the calibration is stored on your computer, so if you
move to a new computer you must repeat the calibration.
510873.qxd 1/5/2004 10:00 AM Page 23
TOC INDEX