Panasonic EW3111 - Manual (Page 5)

8 7
(mmHg)
90
85
80
120 130 140 (mmHg)
Orange
LED Colors
Yellow
Green
Hypertensive
(Low / Moderate / Severe)
Diastolic
Systolic
Blood Pressure
Indicator
Normal High
Normal
Optimal
P/min.
140
130
90
85
M1 M2
Alarm function signals high blood pressure
Blood pressure measurements for both systolic and diastolic readings are
determined and indicated via a three-color LED system as being within
normal or hypertensive ranges based on definitions and classification of
blood pressure levels by the World Health Organization (WHO). Moreover,
when blood pressure is in the high range, the reading displayed on screen
flashes on and off to alert the user.
According to WHO guidelines, values consistently in excess of 140 mmH g
(Sys.) and/or 90 mmH g (Dia.) are considered to constitute high blood pressure.
High blood pressure is a health risk and must be treated without fail.
Please consult your doctor without delay if the blood pressure indicator
repeatedly draws attention to elevated blood pressure values.
Measurement in
progress e.g.: Arm has been moved/
Cuff not positioned correctly Replace batteries
Display/Symbols
= Error
Diagram of device
Connecting tube
to cuff Attachment of cuff holder
Display
ON/OFF / Start Button
Memory /
Recall/(Delete All)
Button 2
Blood Pressure
Indicator LED
Cuff
Cuff Holder
Memory /
Recall/(Delete All)
Button 1
Tube
Cuff Socket
Cuff Plug
(Insert cuff plug all the way in.)
Slide from below in the direction of the
arrow, at the rear of the unit, until a
clicking sound is heard.
(NOTE: To remove,
slide downwards
from above.)