Pride Mobility End-To-End Lift Chair User Manual
Page 2
INFINFB2061/Rev. A/May 2008
www.pridemobility.com
2
B
ASIC
T
ROUBLESHOOTING
I
NSTRUCTIONS
: L
IFT
C
HAIRS
Footrest is not closing all the way
Side brackets need adjustment
Frame needs adjustment
Footrest is mounted too low or high on scissors
Fabric from arms, seat, or footrest catching on lift
chair
Lift Chair drops suddenly and will not work
Broken motor clevis
Broken motor stroke tube
Broken lift frame
Broken lift/recline brackets
Lift Chair is not responding correctly to hand con-
trol selections: Infinite position motors operate to-
gether; Heat and massage switches operate a mo-
tor; Massage unit is operated from motor toggle
switch.
Dip switch in the standard control box may not be
set correctly
Lift Chair is sitting crooked
Wood frame is twisted
Seat foam is broken down (end user favoring one
side)
Leveling leg is missing or needs adjustment
Motors are out of timing
Loose bolts
Scissors
Ground not level
Separation of arm wood from the seat base, as a
result of getting into and out of the lift chair without
using the hand control
Lift Chair is not reclining all the way
Dual motors are out of timing
Scissors are bent or broken
Lift Chair is not lifting all the way
Dual motors are out of timing
Lift frame is broken
Side brackets are broken
Lift Chair springs are popping
Spring clips are not crimped/closed completely
End user not getting in and out of lift chair properly
Lift Chair seat is bunching
Foam is too large for ottoman
Fabric is too large for ottoman
Chaise pad needs to be repositioned on reusable
fasteners
Foam is breaking down
Lift Chair has wrinkles in seat or ottoman cushion
Foam is breaking down
Fabric is stretching
Chaise pad needs to be repositioned on reusable
fasteners
Lift Chair buttons are popping off
Button string is broken
Button clip is broken
Lift Chair has one side touching the floor first
Wood frame is twisted
Scissor is bent or broken
Loose bolts
Lift frame is bent
Ground not level
Leveling leg needs adjustment