Proxima ASA COOLPIX 950 - Manual (Page 20)

- 20 -
Using the Buttons (PLAY)
This chapter describes the following playback functions:
• viewing photographs
• deleting unwanted photographs individually
These functions can be accessed using the zoom (▼W/T▲)
buttons, the command dial, and the three buttons below the
control panel. The options available in the playback menu are
described in the following chapter.
Follow these steps to view or delete photographs stored on the
memory card:
Tips
By default, only photographs in the current folder are displayed in playback
mode. To select another folder for viewing, or to view photos in all folders,
use the FOLDERS item in the playback menu (see “The Camera Menus: The
Playback Menu,” below).
If there are no photographs in the current folder, the message, “card
contains no image data” will be displayed. Select another folder using the
FOLDERS item in the playback menu. If there are no photographs in any
folder, you will be able to use the playback menu (see below), but you will
not be able to play images back.
Photographs selected for full-size display are shown briefly at low resolu-
tion while they are being read from memory. This feature allows you to
page rapidly through the photographs in memory without waiting for every
item to be displayed at full resolution. Before the image is displayed at full
resolution, the screen will briefly go black.
The first and last photographs in memory are linked. Pressing the T/▲
button when the last photo in memory is selected takes you to the first
photo; pressing the W/▼ button when the first photo is selected takes you
to the last photo.
1
Turn the mode dial to PLAY. The most
recently recorded image will be displayed
in the LCD monitor.
2
View the other photos in memory one at a time, or select the
photo you want to view from a menu of preview images.
• To view photos one at a time:
Use the zoom (▼W/T▲) buttons to view photos one at a
time. Press the zoom-out (W/▼) button to view photo-
graphs recorded before the current photo, or press the
zoom-in (T/▲) button to view images recorded after the
current photo. Hold either button down to scroll quickly to
a particular frame number without viewing intervening
photos. The photograph displayed will not change, but the
frame number at the bottom right corner of the LCD
monitor will increase or decrease rapidly. Release the zoom
button when the desired frame number is reached to display
the photo.
The MONITOR button
The MONITOR button controls the LCD monitor. Press the MONITOR
button once to hide photo information, a second time to turn the monitor
off, and a third time to turn the monitor on with information showing.
Using the Buttons (PLAY)