Planet Technology MII Series - Manual (Page 10)

10
Figure 3. 100Base- FX module duplex mode setting of web interface
Table 2 below shows the settings for working under 100Mbps full-
duplex mode and half-duplex mode. Both module (slide-switch) and the
switch (web interface) should be fixed on the same mode.
Speed/duplex 100Full-duplex mode 100Half-duplex mode
Hardware (module) Full-duplex mode Half-duplex mode
Software (firmware) 100 Full 100 Half
Table 2. Settings of 100Base-FX module
Table 3 below shows the slide switch operation for full duplex and half
duplex mode.
Slide Switch Description
FDX
The module works on full duplex mode. The other side must
be also configured on full duplex mode. This provides up
to 2km distance by multi-mode module and 15/20km by
single-mode module.
HDX
The module works on half duplex mode. The other side must
be also configured on half duplex mode. This provides up to
412m distances.
Table 3. Slide switch settings of 100Base-FX module