Planet Technology MII Series - Manual (Page 13)

13
Features:
● Comply with the IEEE 802.3z Gigabit Ethernet standard
● 1 X 1000Mbps fiber port (SX/LX/single SC fiber connectors)
● Store-and-Forward technology for abnormal packet filtering
● Full-duplex mode supported
● Plug and Play Installation
● LED indicators for LNK/ACT, FDX status
● MII-SX provide distance up to 220m over 62.5/125μm fiber cable
and 500m over 50/125μm fiber cable
● MII-LX provide distance up to 550m over multimode fiber cable and
10km over 9/125μm single mode fiber cable
● MII-L40 provide distance up to 550m over multimode fiber cable and
40km over 9/125μm single mode fiber cable
● MII-L70 provide distance up to 550m over multimode fiber cable and
70km over 9/125μm single mode fiber cable
● MII-LA15 / LB15 provide distance up to 550m over multimode fiber
cable and 15km over 9/125μm single mode fiber cable
Note
1. The fiber connector and distance support will be
different by various models.
2. The MII-LA15/LB15 should runs in pair. It means you
must connect MII-LA15 in one end and another MII-
LB15, for example, in the other end.
LED DEFINITION
LED Color Function
LNK/ACT Green
Lit: indicate the link through that port is
successfully established.
Blink: indicate that the switch is actively
sending or receiving data over that port.
FDX Orange
Lit: indicate that port is operating in full-
duplex mode.
Table 5. LED definition of 1000Base-SX/LX Module