Panasonic AJ-D250P - Manual (Page 22)

22
<Notes>
One of the following errors may be displayed on the
third line (remaining tape amount line) in the T&S&R
mode. (See page 74)
[NO RF]:
This appears when a blank part has been
detected on the tape.
“E-09” appears on the front panel’s counter
display.
[LOW RF]:
This appears when there is no head output.
“E-01” appears on the front panel’s counter
display.
[FAN STOP]:
This appears when the cooling fan has shut
down.
“E-70” and the counter value appear alternately
on the front panel’s counter display.
[SERVO NOT LOCKED]:
This appears when the servo is not locked.
“E-00” appears on the front panel’s counter
display area.
Operation mode
The value to be displayed can be selected using setup
menu item No.001 “DISPLAY SEL”.
(See page 28)
TIME: Counter value
T&STA: Counter value and VTR operation mode
T&R:
Counter value and remaining tape amount
T&S&R: Counter value, VTR operation mode and
remaining tape amount
Superimpose Screens
Counter value
TIME mode
TCR : : :
TV monitor
Counter value
T&STA mode
TCR : : :
STOP
TV monitor
VTR operation mode
Counter value
T&S&R mode
TCR : : :
STOP
REMAIN :
TV monitor
VTR operation mode
Counter value
T&R mode
TCR : : :
REMAIN :
TV monitor
Remaining tape amount
Remaining tape amount