Panasonic AJ-D250P - Manual (Page 36)

36
Audio editing functions
The information (setup menu item No. 700, 701) concerning the selection of the joining method
used at the edit points is recorded during digital audio editing, and this information is detected
during playback so that the edit points can be processed automatically.
This applies only when AUTO has been selected as the playback fade selection (setup menu
item No.702) setting.
<Notes>
O
When CUT has been selected for the playback fade selection (setup menu item No.702),
cutting will be performed for all the joins at the edit points.
O
When FADE has been selected for the playback fade selection (setup menu item No.702), V-
fading is performed for all the joins at the edit points.
O
When only one channel has been selected for the sound to be inserted during insert editing,
the sound of the channel which has not been selected will be muted.
Cutting
V-fading
When CUT has been selected as the joining method at the edit points.
(setup menu item No.700, 701)
Noise may appear here at the joins in the edit points.
When FADE has been selected as the joining method at the edit points
(setup menu item No.700, 701)
V-fading is performed instantaneously to suppress the
noise.