Panasonic SC-PT550 - Manual (Page 20)

DISC OPERA
TIONS
ENGLISH
ENGLISH
20
RQT8043
RQTX0038
Advanced play
Displaying current playback condition
 Basics  Details
Functions Menu
( \ page 23)
Off (No on-screen display)
7 Basics
Example:
Current playback
number Elapsed
play time
Current position Play mode
Playback condition
7 Details
Example:
Audio information
Subtitle information
Angle information
Aspect of current title
Total play time of
current title
• Video and audio information is not
displayed during search.
All group, Program and Random play
(during stop)
Program
 Random  Off (Normal play)
All group ( )
To exit all group, program or random play mode
while stopped.
(several times)
• Selecting “Play as Data Disc” in Other Menu
( \ page 26) will be effective if the following functions
are not available to play WMA, MP3, JPEG, MPEG4
or DivX video contents.
• Some items cannot be played even if you
have programmed them.
• Some discs contain bonus groups. If a
password screen appears after selecting a group,
enter the password with the numeric buttons to play
the bonus group. Refer also to the disc’s jacket.
All group play
All Group Playback
Press PLAY to start
Program play (up to 32 items)
1
Press the numeric buttons to select the item.
( Press [ENTER] to
register the selection.)
Example:
• Repeat this step to program other items.
• To select a 2-digit number
Example: To select 12,
2
To select an item using the cursor buttons
Press [ENTER] and [
5, ∞] to select an item, then press
[ENTER] again to confi rm.
To select all the items
While the “Chapter”, “Track” or
“Content” fi eld is highlighted, press
[
5, ∞] to select “ALL”.
Then press [ENTER] again to
confi rm.
Example:
To change the selected program
1. Press [
5, ∞] to select the program number.
2. Press the numeric buttons to change each item.
(
Press [ENTER] to
confi rm the selection.)
To clear the selected program
1. Press [
5, ∞] to select the program number.
2. Press [CANCEL] (or press [
5, ∞, 2, 3] to select
“Clear” and press [ENTER]).
To clear the whole program
Select “Clear all” with [
5, ∞, 2, 3] and press [ENTER].
The whole program is also cleared when the unit is
turned off, the disc tray is opened or another source is
selected.
Random play
1
Press the numeric buttons to select a group
or title. (
Press
[ENTER] to register the selection.)
Example:
Discs which have multiple groups.
• To enter all groups, press [ 2, 3] to select “All” and
press [ENTER].
• To deselect a group, press numeric buttons
corresponding to the group you want to clear.
2
RQTX0038-3B.indd 20 RQTX0038-3B.indd 20 4/2/07 1:45:57 PM 4/2/07 1:45:57 PM