Panasonic SC-PT550 - Manual (Page 29)

DISC OPERA
TIONS
ENGLISH
ENGLISH
29
RQT8043
RQTX0038
Player settings (continued)
7 “Display” tab
Menu Language * 6 • English • Français • Español • Deutsch • Polski • Pусский • Česky • Magyar
* 7 • English • 中文
* 8 • English • Français • Español • Deutsch • Italiano • Nederlands • Svenska • Polski
On-Screen Messages • On • Off
Background during Play
Select background during JPEG,
MPEG4 and DivX video playback. • Black • Grey (or • Gray)
7 “Others” tab
FL Dimmer
Change the brightness of the unit’s
display. • Bright • Dim
• Auto: The display is dimmed, but brightens when you perform some operations.
DivX Registration
Displays the unit’s registration code. You need this registration code to purchase and play DivX Video-on-Demand (VOD) content.
(
\ page 31, “About DivX VOD content”)
QUICK SETUP • Yes • No
Re-initialise Setting
(or Re-initialize Setting)
This returns all values in the Setup
menus to the default settings. • Yes: The password screen is shown if “Ratings” ( \ page 27) is set. Please enter the same
password. After “INIT” on the display disappears, turn the unit off and on again.
• No
* 5 Refer to “Frame still and fi eld still” ( \ page 45, Glossary).
* 6 For Continental Europe, the Middle East, South Africa, Saudi Arabia and Kuwait
* 7 For Southeast Asia and Thailand
* 8 For Australia and N.Z.
* 9 For Continental Europe, the Middle East, South Africa, Saudi Arabi, Kuwait, Australia and N.Z.
* 10 When audio is output from HDMI AV OUT terminal, and the connected equipment does not support the item selected, the actual
output will depend on the performance of this connected equipment.
* 11 For Continental Europe
Changing the delay time of the speakers
Effective when playing multi-channel audio
(Center and surround speakers only)
For optimum listening with 5.1-channel sound, all the
speakers, except for the subwoofer, should be the
same distance from the seating position. If you have
to place the center or surround speakers closer to the
seating position, adjust the delay time to make up for the
difference.
: Actual speakers
position
: Ideal speakers
position
: Primary
listening
distance
Approximate room
dimensions
Circle of
constant
primary
listening
distance
If either distance a or b is less than c, fi nd the
difference in the table and change to the recommended
setting.
a Center speaker
Difference (Approx.) Setting
30 cm 1.0 ms
60 cm 2.0 ms
90 cm 3.0 ms
120 cm 4.0 ms
150 cm 5.0 ms
b Surround speaker
Difference (Approx.) Setting
150 cm 5.0 ms
300 cm 10.0 ms
450 cm 15.0 ms
7 To enter the speaker setting
1
Press [ 5, ∞] to select the delay time box and press
[ENTER].
2
Press [ 5, ∞] to adjust the delay time and press
[ENTER].
Center delay time
Exit
Surround delay time
7 To fi nish the speaker setting
Press [
2] to select “Exit” and press [ENTER].
Note
When you change the surround speaker setting for Dolby Digital,
the setting also changes for Dolby Pro Logic
II.
Example: the settings for MUSIC are the same as those for Dolby
Digital.
Dolby Digital
Dolby Pro Logic II
MUSIC MOVIE
0 ms 0 ms 10 ms
5 ms 5 ms 15 ms
10 ms 10 ms 20 ms
15 ms 15 ms 25 ms
RQTX0038-3B.indd 29 RQTX0038-3B.indd 29 4/2/07 1:46:12 PM 4/2/07 1:46:12 PM