Pirelli DISCUS DRG A225G User Manual
Page 13
Advertising
DISCUS™ DRG A225G
© (2007) Pirelli Broadband Solutions S.p.A. All Rights Reserved. Proprietary Use Pursuant to Cover Page Instructions.
15
To connect the Ethernet cable:
1.
Connect one end of the Ethernet cable into one of the four Ethernet ports on
the rear of the Router
2.
Connect the other end of the Ethernet cable into the Ethernet Network card
of your computer
3.
Verify if the Ethernet Network card is configured as DHCP client, otherwise
configure it to remain in the same local network of the router interface.
FIGURE 2.
Ethernet Cable Connection
Advertising