Pirelli DISCUS DRG A225G - Manual (Page 14)

DISCUS™ DRG A225G
© (2007) Pirelli Broadband Solutions S.p.A. All Rights Reserved. Proprietary Use Pursuant to Cover Page Instructions.
16
To connect the USB cable, follow the procedure according to your Operating
System:
WINDOWS
1. Connect one end of the USB cable into the USB port of your PC
2. Browse till x:\USB driver folder (where “x” is the CD-ROM drive unit letter);
launch the “setup.exe” executable (“x:\USB driver\setup.exe”) and follow
setup instructions
3. The setup software will invite you to plug the other end of the USB cable into
the USB port on the rear of the Router
MAC 10.x
1. Connect one end of the USB cable into the USB port of your PC
2. Connect the other end of the USB cable into the USB port on the rear of the
Router. The Operating System will automatically recognize the device
FIGURE 3. USB Cable Connection
Don’t plug the other end of the USB cable until setup software will ask you to do it.