Turning the off clock display on or, Setting the fm tuning step 49, Switching auto pi seek 49 – Pioneer DEH-P85BT User Manual

Page 49: Switching the warning tone 49, Switching the face auto open 49, Operating this unit, Turning the off clock display on or off, Setting the fm tuning step, Switching auto pi seek, Switching the warning tone

Advertising
background image

2

Push MULTI-CONTROL left or right to

select the segment of the clock display you
wish to set.
Pushing

MULTI-CONTROL left or right will se-

lect one segment of the clock display:
Hour

—Minute

As you select segments of the clock display
the segment selected will blink.

3

Push MULTI-CONTROL up or down to

put a clock right.

Note

You can match the clock to a time signal by
pressing

MULTI-CONTROL.

! If the minute is 00 to 29, the minutes are

rounded down. (e.g.,

10:18 becomes 10:00.)

! If the minute is 30 to 59, the minutes are

rounded up. (e.g.,

10:36 becomes 11:00.)

Turning the off clock display on
or off

If the off clock display is turned on, when the
sources and the feature demo are off, the
clock display appears on the display.

1

Use MULTI-CONTROL to select

Off clock.

2

Press MULTI-CONTROL to turn the off

clock display on.

# To turn the off clock display off, press
MULTI-CONTROL again.

Setting the FM tuning step

Normally the FM tuning step employed by
seek tuning is 50 kHz. When AF or TA is on,
the tuning step automatically changes to 100
kHz. It may be preferable to set the tuning step
to 50 kHz when AF is on.

1

Use MULTI-CONTROL to select FM step.

2

Press MULTI-CONTROL to select the FM

tuning step.
Pressing

MULTI-CONTROL repeatedly will

switch the FM tuning step between 50 kHz
and 100 kHz while AF or TA is on. The selected
FM tuning step will appear in the display.

Note

The tuning step remains at 50 kHz during manual
tuning.

Switching Auto PI Seek

The unit can automatically search for a differ-
ent station with the same programming, even
during preset recall.

1

Use MULTI-CONTROL to select Auto PI.

2

Press MULTI-CONTROL to turn Auto PI

seek on.

# To turn Auto PI seek off, press
MULTI-CONTROL again.

Switching the warning tone

If the front panel is not detached from the
head unit within four seconds of turning off
the ignition, a warning tone will sound. You
can turn off the warning tone.

1

Use MULTI-CONTROL to select

Warning tone.

2

Press MULTI-CONTROL to turn warning

tone on.

# To turn warning tone off, press
MULTI-CONTROL again.

Switching the face auto open

To protect against theft, this unit features de-
tachable front panel. To detach the front panel
easily, the front panel opens automatically.
This function is on as a default.

1

Use MULTI-CONTROL to select

Face auto open.

Operating this unit

En

49

English

Section

02

Advertising