Timer, Listening to audio from ipod or iphone, Setting the clock play timer – Panasonic SC-HC35 User Manual

Page 12: Sleep timer inserting/removing an ipod/ iphone, Ipod operations

Advertising
background image

12

RQ

T

X

12

60

Timer

This is a 12-hour clock.

1

Press [CLOCK/TIMER] to select “CLOCK”.

2

Within 10 seconds, press [3, 4] to set the

time.

3

Press [OK].

≥ To display the clock, press [CLOCK/TIMER].
≥ Reset the clock regularly to maintain accuracy.

You can set the timer to come on at a certain time to wake you up.
This unit offers 3 optional play timers.
Preparation
≥ Turn the unit on and set the clock (> above).
≥ Prepare the music source (disc, radio, iPod/iPhone or AUX)

and set the volume.

1

Press [CLOCK/TIMER] repeatedly to select

FPLAY 1”, “FPLAY 2” or “FPLAY 3”.

2

Within 10 seconds, press [3, 4] to set the

starting time.

3

Press [OK].

4

Set the finishing time by repeating steps 2 and
3.

To activate the timer

5

Press [PLAY,

F] repeatedly to set the desired

play timer on.

6

Press [Í] to turn the unit off.

≥ The timer will start at the preset time, with the volume increasing gradually to

the preset level.

The sleep timer can turn the unit off after a set time.

Press [SLEEP] to turn the sleep function on or off.

30MIN

# 60MIN # 90MIN # 120MIN

^--------------- OFF (Cancel) (------------}

Press [SLEEP] once to check the remaining time.

≥ The play timer and sleep timer can be used together. The sleep timer always

has the priority. Be sure not to overlap the timer settings.

≥ When “AUTO OFF” is “ON” and the unit is left unused for about 30 minutes,

the unit will shut down even if the play time or sleep time has not expired.

Listening to audio from

iPod or iPhone

Inserting an iPod/iPhone

1

Open the sliding door. (> 9)

2

Insert the suitable dock adapter (not supplied)
for the iPod/iPhone.

≥ Insert the side of the iPod/iPhone dock adapter with the

clips facing towards you first and then push the opposite
side until it clicks into place.

3

Press [<] to unlock the

iPod/iPhone dock and then
pull the docking switch
lever to tilt the iPod/iPhone
dock.

4

Connect the iPod/iPhone
(not supplied) firmly.

≥ Be sure to remove the iPod/iPhone from its case.

5

Push the docking switch
lever back until it clicks into
place.

6

Close the sliding door. (> 9)

Removing an iPod/iPhone

1 Repeat step 1 and 3 (> above).
2 To remove, simply pull the iPod/iPhone straight out.
3 Repeat step 5 and 6 (> above).

≥ If the iPod/iPhone dock is not tilted when connecting or disconnecting the

iPod/iPhone, it may cause damage to the connector.

≥ Be sure to use a dock adapter that is compatible with your iPod/iPhone.

To purchase a dock adapter, consult your iPod/iPhone dealer.

≥ Reduce the volume of the main unit to minimum before connecting or

disconnecting the iPod/iPhone.

Preparation
Press [iPod] ([HC55]: [ , iPod]) repeatedly to select “IPOD”.

≥ The operations may vary or not work depending on the iPod/iPhone models.

Setting the clock

Play timer

Check the settings
(When the unit is
on or in standby
mode)

Press [CLOCK/TIMER] twice.
(The setting is displayed.)

Cancel

Press [PLAY,

F] twice to clear the timer

indicator from the display.

Sleep timer

Inserting/Removing an iPod/
iPhone

A Clips
B Dock adapter
C iPod/iPhone docking

switch lever

D Connector

iPod operations

Play

Press [1/;].

Pause

Press [1/;] or [∫]. Press again to
resume play.

Skip track

Press [:] or [9].

Search the current track

Press and hold [6] or [5].

Display iPod/iPhone
menu/return to previous
menu

Press [iPod MENU] in the play
mode. (Remote control only)

Select contents from
iPod/iPhone menu

Press [3, 4] and then [OK].
(Remote control only)

 

Click!

Click!

SC-HC55_35-RQTX1260.book 12 ページ 2011年4月4日 月曜日 午後4時50分

Advertising
This manual is related to the following products: