Panasonic SC-HC35 - Manual (Page 14)

14
RQ
T
X
12
60
Preparation
Pair the Bluetooth
® device with this unit to create an audio
connection.
1
Press [ , iPod] repeatedly to select
“BLUETOOTH”.
When using it for the first time, it enters pairing mode
automatically.
2
While this unit is in pairing mode, access the
Bluetooth
® menu of the Bluetooth ® device and
execute a Bluetooth ® search to find this unit
(SC-HC55).
≥ Please refer to the Bluetooth ® device user manual for
further instruction on how to connect a Bluetooth ® device.
≥ If prompted for the passkey, enter “0000”.
3
If pairing is successful, the paired device’s
name will be displayed for 2 seconds. The
Bluetooth
® indicator lights up. The unit is now
ready to be used with the Bluetooth ® device.
≥ Make sure the Bluetooth ® device supports A2DP (Advance Audio Distribution
Profile).
≥ This unit supports the A2DP reception which is copyright-protected by
SCMS-T method.
≥ A2DP enables you to stream stereo sound from an audio source (mobile
phone, PC or laptop) to this unit via Bluetooth ® .
≥ Depending on the specification or setting of mobile phones, connection may
not be established, or operation and display may vary.
≥ You can register up to 6 devices into this unit. Disconnect the current
Bluetooth ® device and refer to “To register more devices” (> 15).
≥ If you register more than the maximum device number, the oldest device in
connection history will be overwritten.
≥ If a registered device is re-registered, it will be overwritten.
Pair the Bluetooth ® device with this unit to create an audio
connection.
1
Press [ , iPod] repeatedly to select
“BLUETOOTH”.
2
On the Bluetooth ® device:
Select this unit (SC-HC55) on the Bluetooth ®
setup screen to make the connection.
3
On the Bluetooth ® device:
Start playback of a music source.
≥ If the device is connected, the music will be heard on this unit.
≥ The Bluetooth
® indicator lights when there is a connection.
≥ Please refer to the Bluetooth ® device user manual if required.
4
You can also make the following controls with
the remote control.
≥ To utilize these functions, the Bluetooth ® device must support AVRCP (Audio
Video Remote Control Profile).
≥ This unit cannot transmit data to a Bluetooth ® device.
≥ When playing iPod/iPhone by Bluetooth ® with the main unit, intermittent
sound may be experienced if you leave the iPod/iPhone Bluetooth ® menu
screen active or when making Bluetooth ® registration and connection. If this
occurs, please exit the iPod/iPhone Bluetooth ® menu screen.
≥ When playing music by iPod/iPhone via Bluetooth ® connection and the iPod/
iPhone is connected into this unit iPod/iPhone dock, the audio will not be
re-produced while “BLUETOOTH” is selected. Select “IPOD” to continue
enjoying the music.
You can select the sound input level of the Bluetooth ® device.
1
Press [ , iPod] repeatedly to select
“BLUETOOTH”.
2
Press [SOUND] repeatedly to select “INPUT
LEVEL”.
3
Press [2, 1] to select “0”, “i1” or “i2”.
≥ Select “0” if the sound is distorted.
Press [DISPLAY] repeatedly to view the
information of the current connected device.
BLUETOOTH ---------------------# Connected device name
^-------------------------- Connected profiles(------------------------}
This unit works as a Bluetooth ® hands-free for your mobile
phones.
≥ This unit does not work with Headset Profile (HSP).
≥ When the mobile phone is too close to the microphone of this unit, noise may
occur. Always keep the mobile phone away from the microphone of this unit
when making a call.
≥ The audio from a disc will be paused while calling in hands-free mode.
Bluetooth ® pairing
Basic play
Play Press [1/;] to start play.
Stop Press [∫].
Pause Press [1/;]. Press again to resume play.
Skip track Press [:] or [9].
Display
information Press [DISPLAY] repeatedly.
Input level
Display function
Hands-Free Profile (HFP)
To answer a call
(“IN CALL” blinks) Press [ ]. “CALLING” starts blinking on
the display (Talk into the unit’s
microphone).
Press [
] again to transfer the call to the
mobile phones (“TRANSFER” blinks. You
may now converse using the mobile
phone).
To cancel a call Press [ ].
To adjust the
sound volume Press [+, VOL ,–] (Adjustable from
“TEL VOL 1” to “TEL VOL 10”).
To mute the
microphone Press [MUTE]. Press again to cancel.
(During “MIC MUTE”, the caller is not able
to hear your voice).
SC-HC55_35-RQTX1260.book 14 ページ ２０１１年４月４日 月曜日 午後４時５０分