PYLE Audio PLD43MU - Manual (Page 22)

DISC Operation
Stopping Play
Touch the screen the range (or
press the button on remote
control .) To stop the unit playback.
Touch the
section or press
button on front panel to start play.
NOTE :
1. In DVD mode, touch the section
continually twice to back one track .
2. For some VCD2.0 disc (PBC-playback
control), above these buttons may be
unavailable .
Zoom Function
Repeatedly touch the section of
the ZOOM, the displaying rate can
be 1x, 2x, 3x, 1/2, 1/3, 1/4 . ZOOM
21
Basic Operation
MOD
VOL+ SEL VOL-
During the DISC playback, use the
finger touch the touch screen , it
display will following :
1.previous
2.next
3.pause
4.stop
5.mute
6.mode 7.To next page
8.eject
9.vol+(adjustment +)
10.select
11.vol-(adjustment -)
12.panel angle change
1 3 2 4 5 6
8 7 9 10 11 12
DVD 11-0:44:36
MOD
VOL+ SEL VOL-
Switching the DVD mode
Touch the MOD section on the
touch screen (or press MOD
button ) to select the DISC mode,
it display like following : MOD
Function setup
(different the source the display is different)
Pause (still picture)
Touch the “ ” section on touch
screen during playback will stop
play temporary, touch it again to
return the normal playback .
Skipping Track
During DISC playback, Touch the
section on the touch screen to
skip to next track. (You can also
swing the SEL knob in
direction
to skip to next track.)
During DISC playback, Touch the
section on the touch screen to
skip to back one track .( You can
also swing the SEL knob in
direction to back one track .)
Rapid Forward/Rapid Reverse
During DISC playback, Touch and
hold (for about 2 seconds )the
/
section on the touch screen
(or swing the SEL knob in /
direction on front panel and hold
for a more than 2 seconds)
the speed of rapid forward/reverse
changes according to the disc as
follow:
DVD/VCD/CD/MP3:
Normal Playback 2x 4x 8x 16x