Panasonic PT-AE500U - Manual (Page 29)

E NGLISH -57
Other
s
56-E NGLISH
B The pin layout and signal names for the DVI-D input connector are shown
below. (interface with TMDS connector on a personal computer)
External view
Pin No. Signal Pin No. Signal
# T.M.D.S data 2- / T.M.D.S data 3+
$ T.M.D.S data 2+ 0 +5 V
% T.M.D.S data 2/4 shield 1 Earth
& T.M.D.S data 4- 2 Hot plug sense
' T.M.D.S data 4+ 3 T.M.D.S data 0-
( DDC clock 4 T.M.D.S data 0+
) DDC data
* - 6 T.M.D.S data 5-
+ T.M.D.S data 1- 7 T.M.D.S data 5+
, T.M.D.S data 1+ 8 T.M.D.S clock shield
- T.M.D.S data1/3 shield
. T.M.D.S data 3- : T.M.D.S clock-
5 T.M.D.S data 0/5 shield
9 T.M.D.S clock+
# *
3 :
2 +
Projection dimensions calculation methods
The following methods will allow you to calculate dimensions such as screen
diagonal length and projection distances. Units in all calculations are metre.
SD
SW
16:9
LW/LT
H1
SH
Screen Width: SW=SDx0.872
Screen Height: SH=SDx0.490
Minimum Projection Distance: LW=1.229xSD-0.0381
Maximum Projection Distance: LT=1.481xSD-0.0381
Image Lower Edge from Lens Center: H1=SW/29
Dimensions
<Units: mm (inch)>
280 (11)
80 (3-1/8)
85 (3-11/32)
278.5 (10-15/16)
65.4 (2-9/16)
269 (10-9/16)
49.7 (1-15/16)