Porter-Cable DSR2210 - Manual (Page 50)

14 INSTALLING THE SATELLITE RECEIVER
• If the signal quality is orange, you may change the
direction of the dish in order to get a better signal.
• If the signal quality is red, the signal is bad.
The signal may be bad when:
- the dish is not positioned in the right direction.
- the connection between the dish and the decoder with
the feeder is not well made.
In that case, please contact your dealer.
When the receiving indicator is green and in the region
of 3, the decoder is ready to have the channels input.
5.3 Storing the channels
Select KANALEN INSTALLEREN (button 5 in the menu).
The following screen then appears:
5.3.1 Canal digitaal
If you choose this method, the channels of
CANALDIGITAAL will be stored first as per the order of
CANALDIGITAAL in the Channel List. Then, the other
channels will follow in a indeterminate order.
The decoder allows you to give new number to the
"remaining channels" (the numbers of the
CANALDIGITAAL channels may not however be
changed). With this option, the searching process will last
about 15 to 30 minutes. During this operation, a progress
display appears on the screen.
When the channels have been found (the display shows
100%), a list of all the channels is automatically stored in
the decoder.
5.3.2 In an indeterminate order
If you choose this method, the channels will be stored in
an indeterminate order in the Channel List.
The decoder allows you to give new number to all the
channels (incl. CANALDIGITAAL). The searching process
will last about 15 to 30 minutes. During this operation, a
progress display appears on the screen.
When the channels have been found (the display shows
100%), a list of all the channels is automatically stored in
the decoder.
KANALEN INSTALLEREN
A TERUG NAAR VORIG SCHERM
5.5
1 CANAL DIGITAAL
2 IN WILLEKEURIGE VOLGORDE
KANALEN INSTALLEREN
A TERUG NAAR MENU
5
1 LIJST VAN KANALEN
2 KANALEN HERNUMMEREN
3 KANALEN TOEVOEGEN
4 KANALEN VERWIJDEREN
5 KANALEN INSTALLEREN
English